HP ProCurve series 2500 Management And Configuration Manual page 298

Configuring Advanced Features
Spanning Tree Protocol (STP)
)
Read-Only Fields
Figure 9-69. Example of the STP Configuration Screen
4.
5.
6.
7.
8.
9-104
If the remaining STP parameter settings are adequate for your network,
go to step 8.
Use [Tab] or the arrow keys to select the next parameter you want to change,
then type in the new value or press the Space Bar to select a value. (If you
need information on STP parameters, press [Enter] to select the Actions
line, then press to get help.)
H
Repeat step 5 for each additional parameter you want to change.
For information on the Mode parameter, see "STP Fast Mode" on page
9-109.
When you are finished editing parameters, press [Enter] to return to the
Actions line.
Press [S] to save the currently displayed STP parameter settings, then
return to the Main Menu.