Using The Menu To Manage A Candidate Switch - HP ProCurve series 2500 Management And Configuration Manual

No (the default) prevents automatic joining of Candidates that
•
have their
Auto Join
• Yes enables the Commander to automatically take a Candidate
into the stack as a Member if the Candidate has
( the default Candidate setting) and does not have a previously
configured password.
8. Accept or change the transmission interval (default: 60 seconds), then
press [Enter] to return the cursor to the
9. Press [S] (for ) to save your configuration changes and return to the
Save
Stacking menu.
Your Commander switch should now be ready to automatically or manually
acquire Member switches from the list of discovered Candidates, depending
on your configuration choices.

Using the Menu To Manage a Candidate Switch

Using the menu interface, you can perform these actions on a Candidate
switch:
Add ("push") the Candidate into an existing stack
I
I Modify the Candidate's stacking configuration (
)
Interval
Convert the Candidate to a Commander
I
I Disable stacking on the Candidate so that it operates as a standalone
switch
In its default stacking configuration, a Candidate switch can either automati-
cally join a stack or be manually added ("pulled") into a stack by a Commander,
depending on the Commander's
Candidate's configuration options:
Configuring Advanced Features
HP ProCurve Stack Management
set to .
Yes
line.
Actions
setting. The following table lists the
Auto Grab
set to
Auto Join Yes
Auto Join and Transmission
9-17