Monitoring and Analyzing Switch Operation
Port Monitoring Features
Menu: Configuring Port Monitoring
This procedure describes configuring the switch for monitoring when moni-
toring is disabled. (If monitoring has already been enabled, the screens will
appear differently than shown in this procedure.)
1.
Figure 10-16. The Default Network Monitoring Configuration Screen
2.
3.
4.
10-22
From the Console Main Menu, Select:
2. Switch Configuration...
3. Network Monitoring Port
In the Actions menu, press [E] (for
If monitoring is currently disabled (the default) then enable it by pressing
the Space bar (or [Y]) to select
Press the downarrow key to display a screen similar to the following and
move the cursor to the Monitoring Port parameter.
Enable monitoring
by setting this
parameter to "Yes".
).
.