Cli: Configuring Port Security - HP ProCurve series 2500 Management And Configuration Manual

Using Passwords, Port Security, and Authorized IP Managers To Protect Against Unauthorized Access
Figure 7-5. Example of the Port Security Configuration Display for a Single Port
The following command example shows the option for entering a range of
ports, including a series of non-contiguous ports. Note that no spaces are
allowed in the port number portion of the command string:
HP2512(config)# show port-security 1-3,6,8

CLI: Configuring Port Security

Using the CLI, you can:
I Configure port security and edit security settings.
I Add or delete devices from the list of authorized addresses for one or
more ports.
I Clear the Intrusion flag on specific ports
Syntax: port-security <port-list>
[learn-mode continuous]
[learn-mode static]
[action <none | send-alarm | send-disable>]
[clear-intrusion-flag]
no port-security <port-list> mac-address <mac-addr> [<mac-addr> . . .
For information on the individual control parameters, see the Port Security
Parameter tables on pages 7-14 and 7-15.
[address-limit <integer>]
[mac-address <mac-addr>] [<mac-addr> . . . <mac-addr>]
<mac-addr>]
Configuring and Monitoring Port Security
7-17