D Transmitting A Position Reply Call - Icom IC-GM651 Instruction Manual

6
DSC OPERATION

D Transmitting a Position Reply call

Transmit a Position Reply call when a Position Request is
received. (p. 87)
To transmit a "Position Reply"— Quick ACK:
➥ After a Position Request call is received, push [CLR] to
stop the alarm, then rotate [SELECTOR] to indicate the
received message log. And then, push [ENT].
Go to step u at p. 67 when the transceiver receives
the GPS data, or go to step r at p. 65 when the trans-
ceiver has no position/time data or manual input posi-
tion/time data.)
To transmit "Position Reply"— Manual ACK:
q Push [MENU] to enter the DSC menu, then rotate [SELEC-
TOR] to select "Position Reply," push [ENT].
• "Position Reply" is added to the DSC menu after receiv-
ing a position request call.
Select Item
Distress Call
Rotate
Received Call Log
Position Request
˘Position Reply
SELECTOR
Test Call
Set up
64
--DSC Menu--
≤
≥
Push
w Rotate [SELECTOR] to select the desired individual ad-
dress or ID code, push [ENT].
--DSC Menu--
Rotate
Select Address
˘Station 1
Station 2
SELECTOR
Station 3
e The call information appears, push [ENT].
--DSC Menu--
Position Request Info
From Station 2
Safety
When the transceiver receives the GPS data from the
connected GPS receiver, the following screens (steps r
to y) do not appear. Go to step u at p. 67.
Push
Push