n Scan types
Scanning is an efficient way to locate signals quickly over a
wide frequency range. The transceiver has Priority scan and
Normal scan.
PRIORITY SCAN
Ch 01
Ch 06
Ch 16
Ch 05
Priority scan searches through all TAG channels in
sequence while monitoring Channel 16. When a signal
is detected on Channel 16, scan pauses until the signal
disappears; when a signal is detected on a channel other
than Channel 16, scan becomes Dualwatch until the
signal disappears.
Ch 02
Ch 03
Ch 04
SCAN OPERATION
Set the TAG channels (scanned channel) before scanning.
Clear the TAG for unwanted channels which inconveniently
stop scanning, such as those for digital communication use.
(Refer to the next page for details.)
Choose the desired scan type from 'Priority' or 'Normal' in
Set mode. (p. 107)
NORMAL SCAN
Ch 01
Ch 06
Ch 05
Normal scan, like priority scan, searches through all TAG
channels in sequence. However, unlike priority scan,
Channel 16 is not checked unless Channel 16 is set as a
TAG channel.
5
Ch 02
Ch 03
Ch 04
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
15
Need help?
Do you have a question about the IC-GM651 and is the answer not in the manual?
Questions and answers