D Transmitting A Position Reply Call - Icom IC-M506 Instruction Manual

7
DSC OPERATION
D Transmitting a Position Reply call
Transmit a Position Reply call when a Position Request call
is received.
When the "POSITION ACK" in DSC Settings is set to 'Auto'
(p. 68), the transceiver automatically transmits a reply call
when receiving a Position Request call.
Quick Reply:
q When a Position Request call
is received, alarm sounds
and the screen shown below
is displayed.
Push [ALARM OFF] to stop
the alarm.
• Even if you do not push
[ALARM OFF], the alarm stops
after 2 minutes, and then the
screen in step w is displayed.
w Push [ACK].
• Push [IGN] to ignore the call
and return to the normal oper-
ating mode.
• Push [INFO] to display the Po-
sition Request call information.
47
About Received call information:
• Push [IGN] to ignore the call and return to the normal operating
mode.
• Push [BACK] to return to the previous screen.
• Push [ACK] to go to the next step.
The Position Reply confirma-
e
tion screen is displayed.
Push [CALL] to transmit the
reply call.
• Push [EXIT] to return to the
normal operating mode.
While transmitting the reply
r
call, the screen shown below
is displayed, and then re-
turns to the normal operating
mode.