D Receiving A Position Request Call - Icom IC-GM651 Instruction Manual

D Receiving a Position Request call

q While monitoring Channel 70 and a Position Request call
is received:
• The alarm sounds depending on the received category.
- Push [CLR] to stop the alarm.
• "Received POS Request" appears in the display.
25W
Received
POS Request
<Station 1
Push
Received
POS Request
<Station 1
After receiving the Position
Request call from Station 1.
• " " means "from."
<
w Rotate [SELECTOR] to indicate the received message
log.
• Push [CLR] to ignore the call.
INT
Blinks
TAG
25W INT
Blinks
TAG
e The received message log is displayed.
• Push [CLR] to cancel and back to the previous screen.
• Push [F], then push [8•
PRT
sage information.
--DSC LOG--
Position Request
From Station 1
Safety
r Push [ENT] to transmit the Position Reply call. (p. 64)
• Position Automatic Acknowledgement
When the position automatic acknowledgement function is
set to ON (p. 100), the transceiver automatically transmits a
Position Reply call after a Position Request call is received.
6
DSC OPERATION
] to print out the received mes-
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
87