Manual Input - Icom IC-GM651 Instruction Manual

w Rotate [SELECTOR] to select the desired pre-programmed
individual address or "Manual Input," push [ENT].
• The ID code for the Individual call can be set in advance. (p. 19)
--DSC Menu--
Rotate
Select Address

Manual Input

˘Station 1
SELECTOR
Station 2
Station 3
When the pre-programmed
address is selected.
When "Manual Input" is selected, set the 9-digit indi-
vidual ID you wish to call with the keypad, push [ENT].
Push
--DSC Menu--
Input Address ID
123123123
CLR
e Push [ENT] to transmit the Position Request call.
• Emergency channel (Channel 70) is automatically selected.
• If Channel 70 is busy, the transceiver stands by until the chan-
nel becomes clear.
≥
Push
Push
r After the Position Request call has been transmitted, re-
turns to the previous condition (before entering the DSC
Push
menu.)
DSC OPERATION
--DSC Menu--
Position Request
Push to Transmit
TX
Position Request
Transmitting
Transmitting
Position Request
CH70 BUSY
When Channel 70 is busy
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
63