Table of Contents
Advertisement
6
DSC OPERATION
n MMSI code programming
The 9-digit MMSI (Maritime Mobile Service Identity: DSC
self ID) code can be programmed.
This code programming can be performed only once.
After the code programming, it can be changed only
by your dealer or distributor.
q Push [MENU•MMSI] to enter MMSI code programming
condition.
• Warning alarm is emitted for 2 sec.
• If the MMSI code has already been programmed, the MMSI
code programming cannot be performed. DSC menu screen
appears after pushing [MENU•MMSI].
MMSI
Push
After
2 sec.
MMSI Input
1st digit blinks
18
Firmware version number indication
(This illustration describes 'Version 1.000'.)
IC-GM651
<MMSI>
No MMSI
Ver1.000
_________
w Input the 9-digit of the specific MMSI code directly with
the keypad.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the input code.
• Push [CLR] to cancel and exit the condition.
Push
MMSI Input
_________
Input the MMSI code
CLR
MMSI Input
Rotate
123______
SELECTOR
MMSI Input
123456789
Cursor moves
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the IC-GM651 and is the answer not in the manual?
Questions and answers