Icom IC-GM651 Instruction Manual page 53

o Input the current UTC time with the keypad. After input-
ting, push [ENT] to set.
• If the data is not necessary to be changed, push [ENT] to skip
the input step.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the position and time data. (see at right)
• Push [CLR] to cancel and back to the previous screen.
1st digit blinks
Push
--DSC Menu--
Input UTC Time
12:00
Input the current UTC time
CLR
--DSC Menu--
Input UTC Time
Rotate
12:1_
Cursor moves
SELECTOR
--DSC Menu--
Input UTC Time
12:15
* If the transceiver has no time data,
'_' (under bar) is indicated.
NOTE: When no position and time data are input, the fol-
lowing screen appears. Push [ENT] to set.
• Push [CLR] to cancel and back to the previous screen.
No Position Data
No Time Data
Push
DSC OPERATION
--DSC Menu--
Are You Sure?
Push
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
45