D Transmitting A Position Reply Call - Icom IC-M504A Instruction Manual

6
DSC OPERATION

D Transmitting a Position Reply Call

Transmit a Position Reply Call when a Position Request Call
is received.
When the Automatic Acknowledgement function is ON (p. 45),
the transceiver automatically transmits a reply call after receiv-
ing a Position Request Call.
q Enter "Position Reply" in the DSC menu.
• "Position Reply" item appears after a position request call
is received.
DSC Menu
(Push [MENU])
w Rotate [DIAL] to select the desired individual address or
ID code, then push [DIAL•ENTER].
Select Address
John
˘Paul
George
Michael
<CLR ˘ Exit / ENT ˘ OK>
When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is con-
nected, next steps e and r (Current position/time pro-
gramming) do not appear. Go to step t.
32
➪
Position Reply
(Rotate [DIAL], then push [DIAL•ENTER].)
--DSC Menu--
e The position information appears. Rotate [DIAL] to edit
your position data (latitude and longitude). (p. 18)
r After editing the position data, push [DIAL•ENTER] to pro-
gram. Rotate [DIAL] to edit the current UTC time, then
push [DIAL•ENTER]. (p. 18)
• After pushing [DIAL•ENTER], "Position Reply Ready"
is displayed.
--DSC Menu--
Position Reply Ready
<CLR ˘ Exit / ENT ˘ OK>
t Push [DIAL•ENTER] to transmit the Position Reply Call to
the selected station.
•Your position data is transmitted.
• Emergency channel (Channel 70) is automatically selected.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.