D Regular Call - Icom IC-GM651 Instruction Manual

6
DSC OPERATION

D Regular call

The nature of the distress should be included in the Distress call.
q Push [MENU] to enter the DSC menu, then rotate [SE-
LECTOR] to select "Distress Call", push [ENT].
Select Item
Rotate
Individual Call
Group Call
˘Distress Call
SELECTOR
Received Call Log
Position Request
Test Call
w Rotate [SELECTOR] to select the nature of the distress,
push [ENT].
• 'Undesignated,' 'Fire, Explosion,' 'Flooding,' 'Collision,' 'Grounding,'
'Capsizing,' 'Sinking,' 'Adrift,' 'Abandoning Ship,' 'Piracy (Piracy at-
tack)' and 'Man Overboard' are available.
• The selected nature of the distress is stored.
• Push [CLR] to cancel and back to the previous screen.
Rotate
˘Undesignated
Fire,Explosion
SELECTOR
Flooding
Collision
Grounding
Capsizing
Sinking
Adrift
Abandoning Ship
Piracy
Man Overboard
34
--DSC Menu--
≤
Push
≥
--DSC Menu--
Select Nature
˘Undesignated
Fire,Explosion
Flooding
Collision
Push
When the transceiver receives the GPS data from the
connected GPS receiver, the following screens (steps e
to t) do not appear. Go to step y at p. 36.
e Input your latitude data directly with the keypad (if you want to
change the displayed data). After inputting, push [ENT] to set.
• If the data is not necessary to be changed, push [ENT] to skip
the input step.
• Push [6• ] to input N; North latitude or [7•
MNO
S; South latitude.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the position and time data. (p. 36)
• Push [CLR] to cancel and back to the previous screen.
Push
Input Latitude
34°34.506N
CLR
Input Latitude
Rotate
SELECTOR
≥
Push
or
* This illustration shows that the transceiver does not receive
the position data from the connected GPS receiver. If the
transceiver has no position data, '_' (under bar) is indicated.
--DSC Menu--
1st digit blinks
Input your latitude data
--DSC Menu--
25°25.506N
Cursor moves
--DSC Menu--
Input Latitude
25°25.415N
Set 'N' (North) or
'S' (South)
] to input
PRS
Push