Icom IC-GM651 Instruction Manual page 74

6
DSC OPERATION
y Input the current UTC time with the keypad. After input-
ting, push [ENT] to set.
• If the data is not necessary to be changed, push [ENT] to skip
the input step.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the position and time data. (see at right)
• Push [CLR] to cancel and back to the previous screen.
Push
Input UTC Time
12:00
Input the current UTC time
CLR
Input UTC Time
Rotate
12:1_
SELECTOR
* This illustration shows that the transceiver does not receive
the UTC time data from the connected GPS receiver. If the
transceiver has no time data, '_' (under bar) is indicated.
66
1st digit blinks
--DSC Menu--
--DSC Menu--
Cursor moves
--DSC Menu--
Input UTC Time
12:15
NOTE: When no position and time data are input, the fol-
lowing screen appears. Push [ENT] to set.
• Push [CLR] to cancel and back to the previous screen.
No Position Data
No Time Data
Push
--DSC Menu--
Are You Sure?
Push