Position And Time Programming - Icom IC-GM651 Instruction Manual

y Push [CLR] to return to the DSC Set up menu.
• Push [ENT] to delete the selected group ID. (see step t)
• Push [F], then push [8• PRT
group ID.
u Rotate [SELECTOR] to select "Exit," push [ENT] to re-
turn to DSC menu.
• Pushing [CLR] also returns to DSC menu.
--DSC Menu--
Set up
DSC Data Output
CH70 SQL Level
Rotate
Medical Transports
Neutral Ship Call
Self Check Test
SELECTOR
˘Exit
i Rotate [SELECTOR] to select "Exit," push [ENT] to re-
turn to the normal operation condition.
• Pushing [CLR] also returns to the normal operation condition.
--DSC Menu--
Select Item
Distress Call
Received Call Log
Rotate
Position Request
Test Call
Set up
SELECTOR
˘Exit
] to print out all the programmed
≤
Push
≤
Push
n Position and Time programming
A Distress call should include the ship's position and time
data. If no GPS is connected, your position and UTC
(Universal Time Coordinated) time should be input manually.
They are included automatically when a GPS receiver
(IEC61162-1: 2000 format) is connected.
• This manual programming is not available when a GPS
receiver (IEC61162-1: 2000 format) is connected.
• Manually programmed position/time data will be held for
23.5 hours only.
q Push [MENU] to enter the DSC menu.
w Rotate [SELECTOR] to select "Position Input,"
push [ENT].
Rotate
--DSC Menu--
Select Item
SELECTOR
˘Position Input
Distress Relay
All Ships Call
Individual Call
Group Call
Distress Call
6
DSC OPERATION
Push
≥
☞Continue to the next page
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
27