D Transmitting A Position Reply Call - Icom IC-M423 Instruction Manual

7
DSC OPERATION
D Transmitting a Position Reply call
Transmit a Position Reply call when a Position Request call
is received.
When the "POSITION ACK" in DSC Settings is set to 'Auto
TX' (p. 66), the transceiver automatically transmits a reply call
when receiving a Position Request call.
Quick Reply:
When a Position Request call is received, beeps sound
q
and the screen shown below is displayed.
Push [ALARM OFF] to stop the beeps.
Push [ACK].
w
45
• Push [INFO] to display the Position Request call information.
Push [BACK] to return to the previous screen, or push [ACK].
The Position Reply confirmation screen is displayed.
e
Push [CALL] to transmit the reply call.
While transmitting the reply call, the screen shown below
r
is displayed, and then returns to the normal operating
mode.