D Transmitting A Position Reply Call - Icom IC-M421 Instruction Manual

6
DSC OPERATION
D D Transmitting a position reply call
Transmit a position reply call when a position request call is
received.
q Push [MENU] to enter the DSC menu.
w Push [L] or [M] to select "Position Reply," and
push [ENT].
• "Position Reply" item appears after a position request
call is received.
Select Item
Group Call
All ships Call
Position Request
˘Position Reply
e Push [L] or [M] to select the desired individual address or
ID code, push [ENT].
Select Address
˘Paul
Beck
John
<CLR˘Exit / ENT˘OK>
34
--DSC Menu--
≥
--DSC Menu--
01
02
03≥
When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is con-
nected, next steps r, t (Current position/time program-
ming) do not appear. Go to step y.
r The position information appears. Set your latitude data
using [L] or [M]. After setting the latitude data, push [ENT]
to set your longitude data.
• Push [CH•DUAL] or [16•C] to move the cursor forward or back-
ward, respectively.
• Push [L] or [M] to edit N; North latitude or S; South latitude
when the cursor is on the 'N' or 'S' position, and W; West longi-
tude or E; East longitude when the cursor is on the 'W' or 'E' po-
sition.
• Push [SCAN•TAG] to clear the latitude/longitude data.
• Push [CLR] to cancel and exit the condition to the DSC menu.
--DSC Menu--
Input Position
Latitude
__ __.___N
<SCAN˘Null Data>
<CLR˘Exit / ENT˘OK>
Set the latitude data
--DSC Menu--
Input Position
Longitude
___ __.___W
<SCAN˘Null Data>
<CLR˘Exit / ENT˘OK>
Set the longitude data
Null
Null