D Receiving An Individual Acknowledgement Call - Icom IC-GM651 Instruction Manual

D Receiving an Individual Acknowledgement call

When receiving "Able to Comply":
q While monitoring Channel 70 and an Individual acknowl-
edgement call "Able to comply" is received:
• The alarm sounds depending on the received category.
- Push [CLR] to stop the alarm.
• "Received Able ACK" appears in the display.
• " " blinks in the display.
25W
Received
Able ACK
<Station 1
Push
Received
Able ACK
<Station 1
After receiving the "Able to
comply" from Station 1.
• " " means "from."
<
w Rotate [SELECTOR] to indicate the received message log.
• Push [CLR] to ignore the call and exit the condition.
INT
Blinks
TAG
25W INT
Blinks
TAG
e The received message log is displayed.
• Push [CLR] to cancel and back to the previous screen.
• Push [F], then push [8• PRT
sage information.
--DSC LOG--
Rotate
Individual ACK
From Station 1
SELECTOR
Routine
Telephony
CH08
Able to Comply
Push
r Push [ENT] to change the channel (specified by you
when the individual call is transmitted) for voice communi-
cation.
6
DSC OPERATION
] to print out the received mes-
≤
to Change CH≥
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
83