I Position And Time Programming - Icom IC-M502AW Instruction Manual

6
DSC OPERATION

I Position and Time programming

A distress call should include the ship's position and time. If
no GPS is connected, your position and UTC (Universal Time
Coordinated) time should be input manually. They are in-
cluded automatically when a GPS receiver (NMEA0183 ver.
2.0 or 3.01) is connected.
This manual programming is not available when a GPS re-
ceiver (NMEA0183 ver. 2.0 or 3.01) is connected.
q Push
[
[
DSC/ENT DSC/ENT
w "POS Input" is selected automatically, push
Input POS
° .
- ° .
Null˘[H/L]
e Edit the digit of your latitude data by using
• Push [ [ ] or ]
CH/WX
CH/WX
ward, respectively.
• After editing latitude data, select "N"; North latitude or "S"; South
latitude.
• Push [ [ ] to clear the position data. ]
HI/LO
HI/LO
16
] to enter the DSC menu.
]
[
[
[
[ CHANNEL
CHANNEL
[ [ ] to move the cursor forward or back- ]
SCAN
SCAN
r Edit the digit of your longitude data by using
• Push [
[ CH/WX]
CH/WX
• After editing longitude data, select "E"; East longitude or "W";
West longitude.
• Push [
[
HI/LO HI/LO
t Push
[
[
DSC/ENT DSC/ENT
time setting condition.
• Push [
[
DSC menu.
] .
]
DSC/ENT
DSC/ENT
y Edit the digit of the current UTC time by using
] .
]
NEL NEL
• Push [ [
CH/WX] CH/WX
] .
]
• Push [
[
HI/LO
HI/LO
u Push
[
[
DSC/ENT
DSC/ENT
• Push [
[
DSC menu.
] or [ ] for cursor movement.
[ ]
SCAN SCAN
] to clear the position data.
]
] to set the position and advance to the
]
] or [ ] to abandon the setting and exit the
9 ] [ ]
16 16 9 LO/DX LO/DX
Input time
UTC :
Null˘[H/L]
] or [ [ ] for cursor movement. ]
SCAN
SCAN
] to clear the time data.
]
] to set the time, and exit the DSC menu.
]
] or [ ] to abandon the setting and exit the
] [ ]
16 9 9 LO/DX LO/DX
16
[ [ ] . ]
CHANNEL
CHANNEL
[
[
CHAN CHAN - -