Log_Configuration> Parameters - Cisco SPA1112 Provisioning Manual

Router Configuration Parameters
<Log_Configuration> Parameters
<Log_Configuration> Parameters
NOTE
Parameter
<Status>
<RAM_Log_Size>
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
This section describes the parameters in the <Log_Configuration> section of the
config.xml file.
In addition to the descriptions, also refer to
Logging Critical Kernel Events and Info System Events to Viewer, Email, and a
Syslog Server, page
Details
Description: Enables or disables logging
User Interface: Administration > Log > Log Module page, Status
field
Values:
0: Disabled
1: Enabled
Default: 0
Example: Logging enabled
<Status>1</Status>
Description: The maximum size of the log file in kilobytes
User Interface: Administration > Log > Log Setting page, Log Size
field
Values: number from 128~1024
Default: 200
Example:
<RAM_Log_Size>200</RAM_Log_Size>
202.
<Log_Configuration> Example:
7
195