Provisioning Parameters
Delta Configuration Report
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
This chapter describes the Provisioning parameters that can be used in
configuration profile scripts. It includes the following sections:
•
Delta Configuration Report, page 66
•
Status.xml Report, page 67
•
Firmware Upgrade Parameters, page 75
•
General Purpose Parameters, page 76
•
Macro Expansion Variables, page 77
•
Internal Error Codes, page 80
The Provisioning parameters described in this chapter are recognized by the
these ATAs beginning with firmware release 2.0.6 and higher unless otherwise
indicated.
When the report rule is set, a SPA phone reports the phone profile to the server
upon boot-up or receiving a report SIP NOTIFY message. By default the entire
profile is reported.
Password or encryption key–related parameter values are not reported to the
server:
<Admin_Password> IP Phone admin password
<User_Password>
<PPPOE_Login_Password>
< VPN_Password>
<Access_Password_N>
profile
IP Phone user password
Camera access password for each camera
5