Sip Page; Sip Parameters Section - Cisco Small Business Pro SPA3102 Administration Manual

ATA Voice Field Reference

SIP page

SIP page
ATA Administration Guide
Debug Level
You can use the Voice tab > SIP page to configure the SIP settings. With some
variations, depending on the model, this page includes the following sections:
•
"SIP Parameters section" section on page133
•
"SIP Timer Values (sec) section" section on page135
•
"Response Status Code Handling section" section on page137
•
"RTP Parameters section" section on page138
•
"SDP Payload Types section" section on page140
•
"NAT Support Parameters section" section on page141
•
"Trunking Parameters section (SPA8000)" section on page144
Voice tab > SIP page >

SIP Parameters section

Max Forward
Max Redirection
Max Auth
Determines the level of debug information that is
generated. Select 0, 1, 2, or 3 from the drop-down menu.
The higher the debug level, the more debug information is
generated.
The default is 0, which indicates that no debug information
is generated.
SIP Max Forward value, which can range from 1 to 255.
The default is 70.
Number of times an invite can be redirected to avoid an
infinite loop.
The default is 5.
Maximum number of times (from 0 to 255) a request may
be challenged.
The default is 2.
B
133