Download Print this page
   

Advertisement

Cisco SPA112 \ Cisco SPA122
1. Setup occurs in the web interface. To log into it, enter the gateway IP address in your
browser's address bar. You can find the gateway IP address by connecting a phone to it
and dialing ****110#. The default username and password are both admin.
2. Open Voip>SIP and enter the following RTP port range:
RTP Port Min: 1024
RTP Port Max: 65455

Advertisement

   Related Manuals for Cisco SPA112

   Summary of Contents for Cisco SPA112

  • Page 1

    Cisco SPA112 \ Cisco SPA122 1. Setup occurs in the web interface. To log into it, enter the gateway IP address in your browser’s address bar. You can find the gateway IP address by connecting a phone to it and dialing ****110#. The default username and password are both admin.

  • Page 2

    3. Open Voip => Line1 and enter the following information: NAT Mapping Enable: no NAT Keep AliveEnable: yes Proxy: login.smarttelplus.eu Register Expires: 300 Display Name: your SIP number (111111, for example) from Settings => User management UserID: your SIP number (111111, for example) from Settings => User management Password: your password for the SIP number from Settings =>...

  • Page 3

    To save your changes, click Submit.

This manual also for:

Spa122

Comments to this Manuals

Symbols: 0
Latest comments: