Cisco SPA1112 Provisioning Manual page 93

Voice Parameters
<AVT_Dynamic_Payload>
<INFOREQ_Dynamic_Payload />
<G726r32_Dynamic_Payload>
<EncapRTP_Dynamic_Payload>
<RTP-Start-Loopback_Dynamic_
Payload>
<RTP-Start-Loopback_Codec>
<NSE_Codec_Name>
<AVT_Codec_Name>
<G711u_Codec_Name>
<G711a_Codec_Name>
<G726r32_Codec_Name>
<G729a_Codec_Name>
<G722_Codec_Name>
<EncapRTP_Codec_Name>
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
AVT dynamic payload type. The valid range is 96-127.
Default setting: 101
INFOREQ dynamic payload type.
Default setting: blank
G726r32 dynamic payload type.
Default setting: 2
EncapRTP Dynamic Payload type.
Default setting: 112
RTP-Start-Loopback Dynamic Payload type.
Default setting: 113
RTP-Start-Loopback Codec. Select one of the following:
G711u, G711a, G726-32, G729a.
Default setting: G711u
NSE codec name used in SDP.
Default setting: NSE
AVT codec name used in SDP.
Default setting: telephone-event
G.711u codec name used in SDP.
Default setting: PCMU
G.711a codec name used in SDP.
Default setting: PCMA
G.726-32 codec name used in SDP.
Default setting: G726-32
G.729a codec name used in SDP.
Default setting: G729a
G.722 codec name used in SDP.
Default setting: G722
EncapRTP codec name used in SDP.
Default setting: encaprtp
6
93