Macro Expansion Variables - Cisco SPA1112 Provisioning Manual

Provisioning Parameters

Macro Expansion Variables

Macro Expansion Variables
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
Parameter Name
GPP_A through GPP_P
Certain macro variables are recognized within the following provisioning
parameters:
• Profile_Rule
• Profile_Rule_*
• Resync_Trigger_*
• Log_Resync_*
• Upgrade_Rule
• Log_Upgrade_*
• GPP_* (under specific conditions)
Within these parameters, syntax types, such as $NAME or $(NAME), are
recognized and expanded.
Macro variable substrings can be specified with the notation $(NAME:p) and
$(NAME:p:q), where p and q are non-negative integers (available in revision 2.0. 1 1
and above). The resulting macro expansion is the substring starting at character
offset p, with length q (or else till end-of-string if q is not specified). For example, if
GPP_A contains ABCDEF, then $(A:2) expands to CDEF, and $(A:2:3) expands to
CDE.
An unrecognized name is not translated, and the $NAME or $(NAME) form remains
unchanged in the parameter value after expansion.
Description and Default Value
General purpose provisioning parameters.
These parameters can be used as variables in
provisioning and upgrade rules. They are
referenced by prepending the variable name
with a '$' character, such as $GPP_A.
The default value is (empty).
5
77