Cisco SPA1112 Provisioning Manual page 74

Provisioning Parameters
Configuration Profile Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
Parameter Name
Report_Rule
Description and Default Value
The target URL to which configuration
reports are sent. This parameter has the
same syntax as the Profile_Rule parameter,
and resolves to a TCP/IP command with an
associated URL.
A configuration report is generated in
response to an authenticated SIP NOTIFY
message, with Event: report. The report is
an XML file containing the name and value
of all the device parameters.
This parameter may optionally contain an
encryption key.
For example:
[ --key $K ] tftp://ps.callhome.net/$MA/
rep.xml.enc
Additionally, this parameter can trigger the
reporting of configuration changes (deltas)
to the server since the last resync, reboot,
or upgrade using the --delta option.
For example, to store delta configuration
changes in a file with a name like
SPA504G_<MAC>_<serial#>.xml, add the
following to your provisioning file:
[ --delta ]
http://reportTargetServer/reportPath/
$PN_$MA_$SN.xml
</Report_Rule>
The default value is (empty).
5
74