Qos_Bandwidth_Control> Parameters - Cisco SPA1112 Provisioning Manual

Router Configuration Parameters
<QoS_Bandwidth_Control> Parameters
<QoS_Bandwidth_Control> Parameters
NOTE
Parameter
<QoS_Always_ON>
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
</Time_Setup>
...
<router-configuration>
This section describes the parameters in the <QoS_Bandwidth_Control> section
of the config.xml file.
In addition to the descriptions, also refer to
QoS always on, maximum bandwidth of 20,000 kbps, page
<WAN>
All parameters in the <Qos_Bandwidth_Control> section are nested between
<WAN> and </WAN>.
Details
Description: Determines whether QoS settings are enabled at all
times or only when there is voice traffic
User Interface: Network Setup > Application > QoS page, QoS
Policy field
Values:
0: On When Phone In Use
1: Always On
Default: 0
Example: On when phone is in use
<QoS_Always_ON>0</QoS_Always_ON>
<QoS_Bandwidth_Control> Example:
180.
7
179