Cisco SPA1112 Provisioning Manual page 100

Analog telephone adapters
Table of Contents

Advertisement

Voice Parameters
<Ans_Call_Without_Reg_1_> through
<Ans_Call_Without_Reg_13_>
<Use_DNS_SRV_1_> through <Use_
DNS_SRV_13_>
<DNS_SRV_Auto_Prefix_1_> through
<DNS_SRV_Auto_Prefix_13_>
<Proxy_Fallback_Intvl_1_> through
<Proxy_Fallback_Intvl_13_>
<Proxy_Redundancy_Method_1_>
through <Proxy_Redundancy_Method_
13_>
<Mailbox_Subscribe_URL_1_>
<Mailbox_Subscribe_URL_2_>
<Mailbox_Subscribe_URL_5_> through
<Mailbox_Subscribe_URL_13_>
<Mailbox_Subscribe_Expires_1_>
through <Mailbox_Subscribe_Expires_
13_>
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
Allow answering inbound calls without successful (dynamic)
registration by the unit.
Default setting: no
Whether to use DNS SRV lookup for Proxy and Outbound
Proxy.
Default setting: no
If enabled, the ATA will automatically prepend the Proxy or
Outbound Proxy name with _sip._udp when performing a DNS
SRV lookup on that name.
Default setting: no
After failing over to a lower priority server, the ATA waits for
the specified Proxy Fallback Interval, in seconds, before
retrying the highest priority proxy (or outbound proxy)
servers. This parameter is useful only if the primary and
backup proxy server list is provided to the ATA via DNS SRV
record lookup on the server name. (Using multiple DNS A
records per server name does not allow the notion of priority,
so all hosts will be considered at the same priority and the
ATA will not attempt to fall back after a failover.)
Default setting: 3600
The method that the ATA uses to create a list of proxies
returned in the DNS SRV records. If you select Normal, the list
will contain proxies ranked by weight and priority. If you
select Based on SRV port, the ATA also inspects the port
number based on 1st proxy's port.
Default setting: Normal
The URL or IP address of the voicemail server.
Default setting: blank
The subscription interval for voicemail message waiting
indication. When this time period expires, the ATA sends
another subscribe message to the voice mail server. Default:
2147483647
6
100

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa232dSpa122

Table of Contents