Voice Parameters
<Restricted_Access_Domains>
<Enable_Web_Admin_Access>
<IVR_Admin_Password>
<Network_Startup_Delay>
<DNS_Query_TTL_Ignore<
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
This chapter describes the voice parameters for the ATAs.
A note about parameter numbering:
Certain types of parameters apply to multiple elements, such as users and lines. In
the configuration file, the parameter name is appended with a number, such as
<Line_Enable_1_> and <Line_Enable_2_>. To understand this numbering system,
use the following key:
•
1—User 1 or Line1 (PHONE1 port, all models)
•
2—User 2 or Line 2 (PHONE2 port, SPA100 Series only)
This feature is not currently used.
This feature enables or disables access to the configuration
utility from devices that are connected via the ETHERNET
(LAN) port.
Default setting: Yes (enabled)
Password for the administrator to manage the ATA by using
the built-in IVR through a connected phone.
The number of seconds of delay between restarting the voice
module and initializing network interface.
Default setting: 3
In DNS packages, the server will suggest a TTL value to the
client; if this parameter is set to yes, the value from the server
will be ignored.
Default setting: yes
6