Vpn_Passthrough - Cisco SPA1112 Provisioning Manual

Router Configuration Parameters
<VPN_Passthrough>
<VPN_Passthrough>
NOTE
Parameter
<IPSec_Passthrough>
<PPTP_Passthrough>
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
This section describes the parameters in the <VPN_Passthrough> section of the
config.xml file.
In addition to the descriptions, also refer to
passthrough options enabled, page
Details
Description: Enables or disables VPN passthrough for Internet
Protocol Security (IPsec)
User Interface: Network Setup > Advanced Settings > VPN
Passthrough page, IPsec Passthrough field
Values:
0: Disabled
1: Enabled
Default: 1
Example:
<IPSec_Passthrough>1</IPSec_Passthrough>
Description: Enables or disables VPN passthrough for Point-to-Point
Tunneling Protocol (PPTP)
User Interface: Network Setup > Advanced Settings > VPN
Passthrough page, PPTP Passthrough field
Values:
0: Disabled
1: Enabled
Default: 1
Example:
<PPTP_Passthrough>1</PPTP_Passthrough>
<VPN_Passthrough> Example: All
186.
7
185