Download Print this page

Cisco SPA112 Quick Start Manual

Spa100 series analog telephone adapters two port phone adapter ata with router.
Hide thumbs

Advertisement

Cisco SPA100 Series Analog Telephone
Adapters
SPA112 Two Port Phone Adapter
SPA122 ATA with Router
Package Contents
• Analog Telephone Adapter
• Ethernet Cable
• Power Adapter

• Quick Start Guide

• Product CD-ROM
Quick Start Guide

Advertisement

   Related Manuals for Cisco SPA112

   Summary of Contents for Cisco SPA112

  • Page 1: Quick Start Guide

    Quick Start Guide Cisco SPA100 Series Analog Telephone Adapters SPA112 Two Port Phone Adapter SPA122 ATA with Router Package Contents • Analog Telephone Adapter • Ethernet Cable • Power Adapter • Quick Start Guide • Product CD-ROM...

  • Page 2: Before You Begin

    Thank you for choosing a Cisco SPA100 Series Analog Telephone Adapter. This product family includes the following models: • SPA112 Two-Port Phone Adapter: 2 FXS ports and 1 10/100 WAN port. • SPA122 ATA with Router: 2 FXS ports, 1 10/100 WAN port, 1 10/100 LAN port, and built-in router.

  • Page 3: Back Panel

    Ethernet cable. SPA122 Only Internet (Blue) Connect to a broadband network device (DSL or cable modem) or a network router, using an Ethernet cable. Power Connect to a power source, using the provided power adapter. Cisco SPA100 Series Analog Telephone Adapters...

  • Page 4: Connecting The Equipment

    SPA122 Only: Optionally, connect one end of an Ethernet network cable to the ETHERNET (Yellow) port of the ATA. Connect the other end to a device on your network, such as a computer. Connect the provided power adapter to the Power port. Cisco SPA100 Series Analog Telephone Adapters...

  • Page 5: Configuration And Management Of The Ata

    Start a web browser on your computer. In the Address bar, enter the IP address of the ATA. • SPA112: Use the ATA’s IVR or your router’s configuration utility to find the dynamically assigned IP address of the ATA. For information about the IVR, see...

  • Page 6: Using The Ivr For Administration

    Press the # (pound) key to indicate that you have finished entering the IP address. – Press 1 to save the IP address or press the (star) key to cancel your entry and return to the main menu. Cisco SPA100 Series Analog Telephone Adapters...

  • Page 7

    Press the (star) key to enter a decimal point. Note: This option is available only after you choose Static IP as the Internet Connection Type, through option 101. Check Gateway IP Address Cisco SPA100 Series Analog Telephone Adapters...

  • Page 8

    Check Line 2 SIP Transport 1920 Set Line 2 SIP Transport 1921 0: UDP 1: TCP 2: TLS Exit IVR 3948 Allow or prevent WAN access 7932 1: Enable to the administration web 0: Disable server Cisco SPA100 Series Analog Telephone Adapters...

  • Page 9: Mounting The Ata

    Wall Mounting The ATA has two wall-mount slots on the bottom panel. To mount the ATA on a wall, you need mounting hardware (not included). Suggested hardware is illustrated (not true to scale). Cisco SPA100 Series Analog Telephone Adapters...

  • Page 10

    Recommended hardware (not included): Two number-six pan-head tapping screws, 5/8-in. length, with anchors for sheet rock installation. 5/8 in. (15.8 mm) Insecure mounting might damage the ATA or cause injury. Cisco ARNING is not responsible for damages incurred by insecure wall- mounting.

  • Page 11: Where To Go From Here

    Cisco Small Business www.cisco.com/go/smallbiz_opensource_ Open Source Requests request Product Documentation Cisco Small Business www.cisco.com/go/smallbizvoicegateways Analog Telephone Adapters Cisco Small Business Cisco Partner Central www.cisco.com/web/partners/sell/smb for Small Business (Partner Login Required) Cisco Small Business www.cisco.com/smb Home Cisco SPA100 Series Analog Telephone Adapters...

  • Page 12

    Small Business Support, Global: www.cisco.com/go/sbsc 78-19933-01 Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/ trademarks. Third party trademarks mentioned are the property of their respective owners.

This manual also for:

Spa100, Spa122

Comments to this Manuals

Symbols: 0
Latest comments: