Configuring Product Specific Configuration Parameters - Cisco ATA 187 Administration Manual

Chapter 4 Configuring the ATA 187

Configuring Product Specific Configuration Parameters

Cisco Unified Communications Manager Administration allows you to set some product specific
configuration parameters for the ATA 187.
configure the parameters.
Table 4-2
Configuration Window
Enterprise Phone
Configuration window
Common Phone Profile
window
Phone Configuration window Device > Phone; Product Specific Configuration portion of window
Table 4-3
Administration.You can set the configuration parameters using any of the three configuration windows
listed in
When you set the parameters, select the Override Common Settings check box for each setting you wish
to update. If you do not check this box, the corresponding parameter setting does not take effect.
Note Some ATA 187 parameters are set from port 1 only. Setting the parameters from port 2 will have no
effect. Set the following parameters from port 1 only—IVR Password, Phone Load Name, CDP, and Web
Access.
Table 4-3
Parameter
Auto Barge
Call Sequence
Callee Connect Polarity
Callee Disconnect Polarity
Caller Connect Polarity
OL-21862-01
Configuration Information
Path
System > Enterprise Phone Configuration
Device > Device Settings > Common Phone Profile
lists the configuration parameters you can set using Cisco Unified Communications Manager
Table 4-2.
Configuration Parameters for the ATA 187
Cisco ATA 187 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)
Configuring Product Specific Configuration Parameters
Table 4-2 lists the configuration windows and their paths to
Description
Auto Barge adds a user to an active call. An offhook phone
automatically adds the user (initiator) to the shared line call
(target), and the users currently on the call receive a tone (if
configured). Barge supports built-in conference and shared
conference bridges.
The Auto Barge feature allows the user to go offhook and be
added to the call. The Auto Barge feature supports built-in
conferences and shared conference bridges.
Bellcore FSK
•
ETSI FSK
•
• User forward polarity while callee is connected
• User reverse polarity while callee is connected
User forward polarity while callee is disconnected
•
User reverse polarity while callee is disconnected
•
User forward polarity while caller is connected
•
User reverse polarity while caller is connected
•
4-5