Cisco SPA1112 Provisioning Manual page 131

Voice Parameters
<Secure_Call_Indication_Tone>
<VoIP_PIN_Tone>
<PSTN_PIN_Tone>
<Feature_Invocation_Tone>
<Ring1_Cadence>
<Ring2_Cadence>
<Ring3_Cadence>
<Ring4_Cadence>
<Ring5_Cadence>
<Ring6_Cadence>
<Ring7_Cadence>
<Ring8_Cadence>
<CWT1_Cadence>
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
Played when a call has been successfully switched to secure
mode. It should be played only for a short while (less than 30
seconds) and at a reduced level (less than -19 dBm) so it does
not interfere with the conversation.
Default setting: 397@-5,507@-5;15(0/2/0,.2/. 1 /1,. 1 /2. 1 /2)
This tone is played to prompt a VoIP caller to enter a PIN
number.
This tone is played to prompt a PSTN caller to enter a PIN
number.
Played when a feature is implemented.
Default setting: 350@-4;*(. 1 /. 1 /1)
Cadence script for distinctive ring 1.
Default setting: 60(2/4)
Cadence script for distinctive ring 2.
Default setting: 60(.8/.4,.8/4)
Cadence script for distinctive ring 3.
Default setting: 60(.4/.2,.4/.2,.8/4)
Cadence script for distinctive ring 4.
Default setting: 60(.3/.2,1/.2,.3/4)
Cadence script for distinctive ring 5.
Default setting: 1(.5/.5)
Cadence script for distinctive ring 6.
Default setting: 60(.2/.4,.2/.4,.2/4)
Cadence script for distinctive ring 7.
Default setting: 60(.4/.2,.4/.2,.4/4)
Cadence script for distinctive ring 8.
Default setting: 60(0.25/9.75)
Cadence script for distinctive CWT 1.
Default setting: 30(.3/9.7)
6
131