Chapter 5
Configuring the Client Adapter
Setting General Parameters
Setting General Parameters
The Profile Management (General) window (see
Figure
5-1) enables you to set parameters that prepare
the client adapter for use in a wireless network. This window appears after you click New or Modify on
the Cisco Aironet Desktop Utility (Profile Management) window.
Figure 5-1
Profile Management (General) Window
Table 5-2
lists and describes the client adapter's general parameters. Follow the instructions in the table
to change any parameters.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
5-3
OL-4211-03