Cisco SPA1112 Provisioning Manual page 103

Voice Parameters
<DND_Serv_1_>
<DND_Serv_2_>
<DND_Serv_5_> through <DND_Serv_
13_>
<CID–Serv_1_>
<CID–Serv_2_>
<CID–Serv_5_> through <CID–Serv_13_
>
<CWCID_Serv_1_>
<CWCID_Serv_2_>
<CWCID_Serv_5_> through <CWCID_
Serv_13_>
<Call_Return_Serv_1_>
<Call_Return_Serv_2_>
<Call_Return_Serv_5_> through <Call_
Return_Serv_13_>
<Call_Redial_Serv_1_>
<Call_Redial_Serv_2_>
<Call_Redial_Serv_5_> through <Call_
Redial_Serv_13_>
<Call_Back_Serv_1_>
<Call_Back_Serv_2_>
<Call_Back_Serv_5_> through <Call_
Back_Serv_13_>
<Three_Way_Call_Serv_1_>
<Three_Way_Call_Serv_2_>
<Three_Way_Call_Serv_5_> through
<Three_Way_Call_Serv_13_>
<Three_Way_Conf_Serv_1_>
<Three_Way_Conf_Serv_2_>
<Three_Way_Conf_Serv_5_> through
<Three_Way_Conf_Serv_13_>
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
Enable Do Not Disturb Service
Default setting: yes
Enable Caller ID Service
Default setting: yes
Enable Call Waiting Caller ID Service
Default setting: yes
Enable Call Return Service
Default setting: yes
Enable Call Redial Service.
Enable Call Back Service.
Enable Three Way Calling Service. Three Way Calling is
required for Three Way Conference and Attended Transfer.
Default setting: yes
Enable Three Way Conference Service. Three Way
Conference is required for Attended Transfer.
Default setting: yes
6
103