Cisco SPA1112 Provisioning Manual page 8

Deployment and Provisioning
Deployment
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
The service provider works with a Cisco sales engineer to develop a simple
provisioning profile. The profile contains minimal information that redirects the
device to the service provider provisioning server. This profile is placed on the
Cisco RC server by the Cisco Voice Team.
RC Unit Status
The status of an RC unit can be determined by viewing the Info > Product
Information page, Customization section, on the administration web server. An RC
unit that has not been provisioned displays Pending. An RC unit that has been
provisioned displays the name of the company that owns the unit. If the unit is not
an RC unit, the page displays Open.
Below is a sample template for an RC unit to be preprovisioned by Cisco with the
connection information:
Restricted Access Domains "domain.com, domain1.com, domain2.com";
Primary_DNS
Secondary_DNS
Provision_Enable
Resync_Periodic
Resync_Error_Retry_Delay
Profile_Rule * "http://prov.domain.com/sipura/profile?id=$MA";
The Restricted Access Domains parameter is configured with the actual
domain names of up to a maximum of five domains. The Primary_DNS and
Secondary_DNS parameters are configured with the actual domain names or IP
addresses of the DNS servers available to the RC unit.
Retail Distribution
In a retail distribution model, a customer purchases a Cisco IP Telephony
deviceATA and subscribes to a particular service. The Internet Telephony Service
Provider (ITSP) sets up and maintains a provisioning server, and preprovisions the
phone to resynchronize with the service provider server. See
Preprovisioning, page 39
The customer signs on to the service and establishes a VoIP account, possibly
through an online portal, and binds the device to the assigned service account.
When the device is powered up or a specified time elapses, the IP Telephony
device resynchronizes, downloading the latest parameters. These parameters can
address goals such as setting up a hunt group, setting speed dial numbers, and
limiting the features that a user can modify.
* "x.y.w.z";
* "a.b.c.d";
* "Yes";
* "30";
* "30";
for more information.
1
In-House Device
8