Cisco SPA1112 Provisioning Manual page 79

Provisioning Parameters
Macro Expansion Variables
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
Parameter Name
PRVST
UPGST
UPGERR
PRVTMR
UPGTMR
REGTMR1
REGTMR2
UPGCOND
SCHEME
METH
SERV
SERVIP
PORT
PATH
ERR
Description and Default Value
Provisioning State, a numeric string:
-1 = explicit resync request,
0 = power-up resync,
1 = periodic resync,
2 = resync failed, retry attempt
Upgrade State, a numeric string:
1 = first upgrade attempt,
2 = upgrade failed, retry attempt
Result message (ERR) of previous upgrade attempt,
for example http_get failed.
Seconds since last resync attempt.
Seconds since last upgrade attempt.
Seconds since Line 1 lost registration with SIP server.
Seconds since Line 2 lost registration with SIP server.
Legacy macro name, always expands to true in
firmware rev 2.0.6 and above.
File access scheme, one of TFTP, HTTP, or HTTPS, as
obtained after parsing resync or upgrade URL.
Deprecated alias for SCHEME, do not use.
Request target server host name, as obtained after
parsing resync or upgrade URL.
Request target server IP address, as obtained after
parsing resync or upgrade URL, possibly following
DNS lookup.
Request target UDP/TCP port, as obtained after
parsing resync or upgrade URL.
Request target file path, as obtained after parsing
resync or upgrade URL.
Result message of resync or upgrade attempt. Only
useful in generating result syslog messages. The value
is preserved in the UPGERR variable in the case of
upgrade attempts.
5
79