Cisco SPA1112 Provisioning Manual page 202

Router Configuration Parameters
<Log_Configuration> Parameters
Parameter
<MAIL>
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
Description
Description: Enables or disables including the specified logs in the
file that is sent via email
User Interface: Administration > Log > Log Module page, E-Mail
field
Values:
0: Disabled
1: Enabled
Default: 0
Example: Logs will be sent via email
<MAIL>1</MAIL>
<Log_Configuration> Example: Logging Critical Kernel
Events and Info System Events to Viewer, Email, and a Syslog
Server
<router-configuration>
...
<Log_Configuration>
<Log_Configuration>
<Status>1</Status>
<RAM_Log_Size>200</RAM_Log_Size>
<Syslog_Server_IP>209.165.202.129</Syslog_Server_IP>
<Syslog_Server_Port>514</Syslog_Server_Port>
<MAIL_Sender>user1@example.com</MAIL_Sender>
<MAIL_Receiver>user2@example.com</MAIL_Receiver>
<MAIL_Subject>My ATA Logs</MAIL_Subject>
<MAIL_Smtp_Server>smtp.example.com</MAIL_Smtp_Server>
<MAIL_Smtp_Port>25</MAIL_Smtp_Port>
<MAIL_Log_Count>100</MAIL_Log_Count>
<MAIL_Interval>60</MAIL_Interval>
<MAIL_Smtp_User>user1</MAIL_Smtp_User>
<!-- <MAIL_Smtp_Passwd></MAIL_Smtp_Passwd> -->
<KERNEL>
<Enable>1</Enable>
<Priority>2</Priority>
<RAM>1</RAM>
<Syslog>1</Syslog>
<MAIL>1</MAIL>
</KERNEL>
<System>
<Enable>1</Enable>
7
202