Editing The Isolinux.cfg File; Figure I-28: Isolinux.cfg - AudioCodes Mediant 1000 User Manual

H.323 User's Manual
I.7.4.2

Editing the isolinux.cfg File

To edit the isolinux.cfg file, take these 19 steps:
From the Partner Install folder, open the isolinux.cfg file with a text editor that
1.
supports UNIX file format (e.g., PSPad, UltraEdit).
Insert the following line in the beginning of the file, so that it is the first line.
2.
serial 0 115200
Locate the line 'DEFAULT <my_label>'. It is usually the first line of the file. It is usually
3.
'default harddisk' or 'default linux'.
If <my_label> isn't 'linux' (for instance it can be 'harddisk'), change it to 'linux'.
4.
Locate the following line: 'label linux'.
5.
Under the 'label linux' line, two lines should appear.
6.
kernel...
append...
The following examples show how the 'label linux' line and its kernel and append
sublines could look like, before you change them:
label linux
kernel linux
or
label linux
kernel linux
Remove the 'splash=...' and 'showopts' parameters, if they appear in the 'append' line.
7.
Note:
Version 5.0
I. Linux™ Operating System Installation for the OSN Server

Figure I-28: isolinux.cfg

append initrd=initrd splash=silent showopts
append initrd=initrd ramdisk_size=65536 splash=silent
showopts
Do not remove any other parameters in the 'append' line, especially the
'initrd=' parameter.
453 December 2006