Component: Ethernetlink#0; F.1.4 Component: Ethernetlink#0; Table F-13: Acpowersupplyalarm Alarm Trap; Table F-14: Acboardethernetlinkalarm Alarm Trap - AudioCodes Mediant 1000 User Manual

H.323 User's Manual
The source
Chassis#0/PowerSupply#<m>, where m is the power supply's slot number.
Alarm:
OID:
Default Severity:
Event Type:
Probable Cause:
Alarm Text:
Status Changes:
Condition:
Alarm status:
Condition:
Alarm status:
F.1.4

Component: EthernetLink#0

The source varbind text for all the alarms under this component is Board#<n>/EthernetLink#0 where n
is the slot number. This trap relates to the Ethernet Link Module (the #0 numbering doesn't apply to
the physical Ethernet link).
Alarm:
OID:
Default Severity:
Event Type:
Probable Cause:
Alarm Text:
Status Changes:
Condition:
Alarm status:
<text> value:
Condition:
Alarm status:
<text> value:
Condition:
Alarm status:
Corrective Action:
Version 5.0
varbind text

Table F-13: acPowerSupplyAlarm Alarm Trap

acPowerSupplyAlarm
1.3.6.1.4.1.5003.9.10.1.21.2.0.30
Critical
equipmentAlarm
powerProblem
Power-Supply Alarm. Power-Supply is missing.
The HA (High Availability) feature is active and one of the power supply units is
faulty or missing.
Major
PS unit is placed and working.
Cleared

Table F-14: acBoardEthernetLinkAlarm Alarm Trap

acBoardEthernetLinkAlarm
1.3.6.1.4.1.5003.9.10.1.21.2.0.10
Critical
equipmentAlarm
underlyingResourceUnavailable (56)
Ethernet link alarm: <text>
Fault on single interface
major
Redundant link is down
Fault on both interfaces
critical
No Ethernet link
Both interfaces are operational
cleared
Ensure that both Ethernet cables are plugged into the back of the system. Inspect
the system's Ethernet link lights to determine which interface is failing. Reconnect
the cable or fix the network problem
for the alarm
417
F. SNMP Traps
under this component
December 2006
is