AudioCodes Mediant 1000 User Manual page 220

Table 6-2: System Parameters (continues on pages 217 to 221)
ini File Field Name
Web Parameter Name
FXOCoeffFileURL
CasFileURL
AutoUpdateCmpFile
AutoUpdateFrequency
AutoUpdatePredefinedTim
e
ResetNow
BootP and TFTP Parameters
The BootP parameters are special 'Hidden' parameters. Once defined and saved in the flash memory, they are
used even if they don't appear in the ini file.
BootPRetries
BootPSelectiveEnable
H.323 User's Manual
Valid Range and Description
Specifies the name of the FXO coefficients file and the location of the server (IP
address or FQDN) from which it is loaded.
http://server_name/file, https://server_name/file.
Note: The maximum length of the URL addres is 99 characters.
Specifies the name of the CAS file and the location of the server (IP address or
FQDN) from which it is loaded.
http://server_name/file, https://server_name/file.
Note: The maximum length of the URL addres is 99 characters.
Enables / disables the Automatic Update mechanism for the cmp file.
0 = The Automatic Update mechanism doesn't apply to the cmp file (default).
1 = The Automatic Update mechanism includes the cmp file.
Determines the number of minutes the gateway waits between automatic
updates.
The default value is 0 (the update at fixed intervals mechanism is disabled).
Schedules an automatic update to a predefined time of the day.
The range is 'HH:MM' (24-hour format).
For example: 20:18
Note: The actual update time is randomized by five minutes to reduce the load
on the Web servers.
Invokes an immediate restart of the gateway.
This option can be used to activate offline (not on-the-fly) parameters that are
loaded via IniFileUrl.
0 = The immediate restart mechanism is disabled (default).
1 = The gateway immediately restarts after an ini file with this parameter set to
1 is loaded.
Note: This parameter only takes effect from the next reset of the gateway.
This parameter is used to:
Set the number of BootP requests the
gateway sends during start-up. The
gateway stops sending BootP
requests when either BootP reply is
received or number of retries is
reached.
1 = 1 BootP retry, 1 second.
2 = 2 BootP retries, 3 second.
3 = 3 BootP retries, 6 second (default).
4 = 10 BootP retries, 30 second.
5 = 20 BootP retries, 60 second.
6 = 40 BootP retries, 120 second.
7 = 100 BootP retries, 300 second.
15 = BootP retries indefinitely.
Enables the Selective BootP mechanism.
1 = Enabled.
0 = Disabled (default).
The Selective BootP mechanism (available from Boot version 1.92) enables the
gateway's integral BootP client to filter unsolicited BootP/DHCP replies (accepts
only BootP replies that contain the text 'AUDC' in the vendor specific
information field). This option is useful in environments where enterprise
BootP/DHCP servers provide undesired responses to the gateway's BootP
requests.
Note: When working with DHCP (DHCPEnable = 1) the selective BootP feature
must be disabled.
220
Mediant 1000
Set the number of DHCP packets the
gateway sends.
After all packets were sent, if there's
still no reply, the gateway loads from
flash.
1 = 4 DHCP packets
2 = 5 DHCP packets
3 = 6 DHCP packets (default)
4 = 7 DHCP packets
5 = 8 DHCP packets
6 = 9 DHCP packets
7 = 10 DHCP packets
15 = 18 DHCP packets
Document #: LTRT-83401