Configuring The Ip Routing Table; Table 5-25: Ip Routing Table Column Description - AudioCodes Mediant 1000 User Manual

5.6.1.4

Configuring the IP Routing Table

The IP routing table is used by the gateway to determine IP routing rules. It can be used,
for example, to define static routing rules for the OAM and Control networks since a default
gateway isn't supported for these networks (refer to Section
sending an IP packet, the gateway searches this table for an entry that matches the
requested destination host / network. If such entry is found, the gateway sends the packet
to the indicated router. If no explicit entry is found, the packet is sent to the default gateway
(configured in Network Settings>IP Settings screen). Up to 50 routing entries are available.
To configure the IP Routing table, take these 3 steps:
Open the 'IP Routing Table' screen (Advanced Configuration menu > Network
1.
Settings > Routing Table option); the 'IP Routing Table' screen is displayed.
Use the 'Add a new table entry' pane to add a new routing rule. Each field in the IP
2.
routing table is described in
Click the button Add New Entry; the new routing rule is added to the IP routing table.
3.
Column Name
[ini File Parameter Name]
Delete Row
Destination IP Address
[RoutingTableDestinationsColumn]
Destination Mask
[RoutingTableDestinationMasksColu
mn]
H.323 User's Manual
Figure 1-3: IP Routing Table Screen
Table 5-25

Table 5-25: IP Routing Table Column Description

Description
To delete IP routing rules from the IP Routing Table, check the Delete
Row checkbox in the rows of the routing rules you want to delete and
click the button Delete Selected Entries; the routing rules are
removed from the table.
Specifies the IP address of the destination host / network.
Specifies the subnet mask of the destination host / network.
on page 136.
136
Mediant 1000
9.10.1 on page 286). Before
Document #: LTRT-83401