H.323 User's Manual
11.6.4 Modifying ini File Parameters via the Web AdminPage
To modify ini file parameters via the AdminPage, take these 6
steps:
Access the Mediant 1000 Embedded Web Server (refer to Section
1.
In the URL field, append the suffix 'AdminPage' (note that it's case-sensitive) to the IP
2.
address, e.g., http://10.1.229.17/AdminPage.
Click the INI Parameters option; the INI Parameters screen is displayed (shown in
3.
Figure
From the 'Parameter Name' drop-down list, select the required ini file parameter.
4.
In the 'Enter Value' field, enter the parameter's new value.
5.
Click the Apply new value button to the right; the INI Parameters screen is refreshed,
6.
the parameter name with the new value appears in the fields at the top of the screen
and the Output Window displays a log displaying information on the operation.
Note:
Version 5.0
11-8).
Figure 11-8: INI Parameters Screen
You cannot load the image files (e.g., logo/background image files) to the
device by choosing a file name parameter in this screen.
11. Advanced System Capabilities
311
5.3
on page 57).
December 2006