Configuring The Web And Telnet Access List; Figure 5-48: Web & Telnet Access List Screen - AudioCodes Mediant 1000 User Manual

H.323 User's Manual
To change the access level of the secondary account (the access level of the primary
2.
account cannot be changed), from the 'Access Level' drop-down list, select the new
access level, and then click the button Change Access Level; the new access level is
applied immediately.
To change the username of an account, enter the new username in the field 'User
3.
Name', and then click the button Change User Name; the new username is applied
immediately and the 'Enter Network Password' screen appears (shown in
on page 57). Enter the updated username in the 'Enter Network Password' screen.
Note that the username can be a maximum of 19 case-sensitive characters.
To change the password of an account, enter the current password in the field
4.
'Current Password', the new password in the fields 'New Password' and 'Confirm New
Password', and then click the button Change Password; the new password is applied
immediately and the 'Enter Network Password' screen appears (shown in
on page 57). Enter the updated password in the 'Enter Network Password' screen.
Note that the password can be a maximum of 19 case-sensitive characters.
Note:
5.6.7.2

Configuring the Web and Telnet Access List

Use this screen to define up to ten IP addresses that are permitted to access the gateway's
Web and Telnet interfaces. Access from an undefined IP address is denied. This security
feature is inactive (the gateway can be accessed from any IP address) when the table is
empty.
The Web and Telner Access List can also be defined using the ini file parameter
WebAccessList_x (refer to Section
To manage the Web & Telnet access list, take these 4 steps:
Open the 'Web & Telnet Access List' screen (Advanced Configuration menu >
1.
Security Settings > Web & Telnet Access List option); the 'Web & Telnet Access
List' screen is displayed.
Version 5.0
A user with a 'Security Administrator' access level can change all attributes
for all accounts. Users with an access level other than 'Security
Administrator' can only change their own password and username.
6.5.3
Figure 5-48: Web & Telnet Access List Screen
on page 222).
163
5. Web Management
Figure 5-1
Figure 5-1
December 2006