Advanced Configuration; Configuring The Network Settings; Configuring The Ip Settings; Figure 5-33: Ip Settings Screen - AudioCodes Mediant 1000 User Manual

H.323 User's Manual
5.6

Advanced Configuration

Use this menu to set the gateway's advanced configuration parameters.
Note:
5.6.1

Configuring the Network Settings

From the Network Settings you can:
Configure the IP Settings (refer to Section
Configure the Application Settings (refer to Section
Configure the NFS Settings (refer to Section
Configure the IP Routing Table (refer to Section
Configure the VLAN Settings (refer to Section
5.6.1.1

Configuring the IP Settings

To configure the IP Settings parameters, take these 4 steps:
Open the 'IP Settings' screen (Advanced Configuration menu > Network Settings >
1.
IP Settings option); the 'IP Settings' screen is displayed.
Version 5.0
Parameters contained within square brackets are the names used to
configure the parameters via the ini file.

Figure 5-33: IP Settings Screen

5.6.1.1 below)
5.6.1.2
5.6.1.3 on page 133)
5.6.1.4
5.6.1.5 on page 138)
129
5. Web Management
on page 132)
on page 136)
December 2006