Table of Contents
Advertisement
Lens
http://www.barco.com/projection_systems/customer_services/lens_program.asp
2.3.3
Lens installation
How to install ?
Follow the next procedure :
1. Open the lens cover of the projector by pivoting it up and take it off. (image 2-2)
2. Pull the lens locks levers backwards to open the lens locks. (image 2-3)
3. Put the lens on the lens holder. (image 2-4)
4. Push the lens locks back in position and lock the levers.
5. Plug the wires of the motor unit into the connector (image 2-5)
6. Re-install the lens cover.
Image 2-2
Image 2-4
The procedure for the mounting of a Scheimpflug lens is different.
Refer to the installation manual of the lens.
Never transport the projector with the lens mounted on it !
Always remove the lens before transporting the projector.
R5976420 BARCOREALITY SIM 6 ULTRA 14052003
program
to
calculate
Image 2-5
the
projector
distance
Image 2-3
2. Installation Guidelines
is
available
on
the
BARCO
web
site
:
11
Advertisement
Table of Contents
