Table of Contents
Advertisement
27. Maintenance
Reinstalling the side panel
1. Move the cover guides under the back cover and push the front of the cover against the projector frame lining up the cover lock
screw with the speed nut (A) on the frame.
Image 27-117
Mounting the side cover
2. Turn with a screwdriver the side panel lock screw (B) a quarter turn clockwise to lock.
27.5.5.6 Lens Installation
How to install ?
Follow the next procedure:
1. Move the handle (A) of the lens anchor system to the right.
Image 27-118
Lens installation
2. Push the lens, motors at the top, in the lens block gap horizontally, lining up the motor connector on the lens with the connector
on the lens block (B), until the lens clicks in the lens anchor system.
244
R5976820 SLM R12+ PERFORMER 08/03/2005
Advertisement
Table of Contents
