Related Manuals for Barco GALAXY R9040310
Summary of Contents for Barco GALAXY R9040310
- Page 1 SIMULATION PRODUCTS ARCO ALAXY R9040310 R9040311 ’ WNER ANUAL 15042003 R5976445/02...
- Page 2 Barco nv Simulation Products 600 Bellbrook Ave, Xenia OH 45385 Phone: +1 (937) 372 7579 Fax: +1 (937) 372 8645 E-mail: eis@barco.com Visit us at the web: www.eis.barco.com Barco nv Simulation Products Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.36.84.86 E-mail: info@barco.com...
- Page 3 Changes Barco provides this manual “as is” without warranty of any kind, either expressed or implied, including but not limited to the implied war- ranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time without notice.
-
Page 5: Table Of Contents
8.2.4 Start up ......................... . 39 R5976445 BARCO GALAXY 15042003... - Page 6 10.9BARCO Logo ......................... . 81 R5976445 BARCO GALAXY 15042003...
- Page 7 Index........................91 R5976445 BARCO GALAXY 15042003...
- Page 8 Table of contents R5976445 BARCO GALAXY 15042003...
-
Page 9: Safety Instructions
Definition Qualified service technicians or Qualified technicians : Persons having appropriate technical training and experience nec- essary to be aware of hazards to which they are exposed in performing a task and of measures to minimize the danger to themselves or other persons. R5976445 BARCO GALAXY 15042003... - Page 10 1. Safety Instructions Extra Safety manual Read also safety instructions in separate manual (R5976125). R5976445 BARCO GALAXY 15042003...
-
Page 11: Packaging And Dimensions
Lens Packaging • Projector Case 2.1 Box Content Content • 1 projector BARCO Galaxy (weight ± 46.5 kg or 102.5 lbs) • 1 remote control unit + 2 batteries (1,5V) • 1 European and 1 American power cable • 1 owner’s manual 2.2 Lens Packaging... - Page 12 2. Packaging and Dimensions Image 2-2 Left view dimensions Image 2-3 Bottom view dimensions R5976445 BARCO GALAXY 15042003...
-
Page 13: Installation Guidelines
Failure to take suitable precautions to protect the projector from the effects of persistent and prolonged air contami- nants will culminate in extensive and irreversible ingrained optical damage. At this stage cleaning of the internal optical units will be R5976445 BARCO GALAXY 15042003... -
Page 14: Configuration
Rear Ceiling Positioning the projector The Projector should be installed perpendicular with the screen on a distance PD and water leveled in both directions. The mounting positions in following images are shown for a nominal lens position. R5976445 BARCO GALAXY 15042003... - Page 15 3. Installation Guidelines Image 3-1 Front table configuration R5976445 BARCO GALAXY 15042003...
-
Page 16: Safety Area Arround The Projector
Make sure the projector is located so that the air inlets and outlets for the cooling system are not obstructed. Leave a safety area A of about 1 meter on the left and the right side of the projector. R5976445 BARCO GALAXY 15042003... -
Page 17: Re-Adjusting The Lamp Position In The Lamp Casing
Select with ↑ or ↓ Select with ↑ or ↓ Select with ↑ or ↓ then <ENTER> then <ENTER> <EXIT> to return. <EXIT> to return. then <ENTER> <EXIT> to return. Menu 3-1 Menu 3-2 Menu 3-3 R5976445 BARCO GALAXY 15042003... -
Page 18: Lenses
3. Installation Guidelines Image 3-4 Lamp adjustment access Image 3-5 Never turn the other screws ! These are factory aligned. 3.5 Lenses Overview • Lenses • Lens selection • Lens formulas • Lens Installation • Cleaning the lens R5976445 BARCO GALAXY 15042003... -
Page 19: Lenses
BARCO side http://www.barco.com/projection systems/customer services/lens program.asp 3.5.4 Lens Installation How to install ? Follow the next procedure: 1. Remove the foam rubber in the opening of the lens holder. 2. Take the lens assembly out of its packing material and remove the lens caps on both sides. -
Page 20: Cleaning The Lens
Other lenses can also be cleaned safely with this Toraysee cloth. 3.6 Battery Installation in the RCU How are the batteries delivered ? The batteries (not yet installed to save the battery life time) are delivered inside the plastic bag with the power cord. R5976445 BARCO GALAXY 15042003... -
Page 21: How To Install
2. Lift up the top side of the cover at the same time. 3. Insert the 2 new 1,5 V batteries as indicated in the RCU. (image 3-8) 4. Put the battery cover back on its place. Image 3-8 Battery installation R5976445 BARCO GALAXY 15042003... - Page 22 3. Installation Guidelines R5976445 BARCO GALAXY 15042003...
-
Page 23: Stereo Mode
When does the projector run in Stereo Mode ? • It is possible to program a Turnover frequency for the BARCO Galaxy projector, when a source is detected with a vertical frequency that exceeds this Turnover point the projector will switch from Mono Mode to Stereo Mode. - Page 24 6. Select the Stereo Options in the main menu, put Invert Phase to ON and adjust the Stereo Phase.(see chapter 8. Random Access Adjustment Mode, Stereo Options, page 56). 7. Select Stereo Timings, adjust the vertical back porch and horizontal delay.(see chapter 8. Random Access Adjustment Mode, Stereo Timings, page 59). R5976445 BARCO GALAXY 15042003...
-
Page 25: Connections
1. Press Stand by key once on the local keypad or on the remote control. (image 5-1) The projector mode indication lamp will be green. Press a digit button to select an input source. Image 5-1 Stand by keys on RCU and local keypad R5976445 BARCO GALAXY 15042003... -
Page 26: Switching To Standby
The total lifetime of the lamp for a safe operation is 1000 or 1500 (depending on the lamp type) hours max. Do not use it longer. Always replace with a same type of lamp. Call a BARCO authorized service technician for lamp replacement. -
Page 27: Input Source Connections
• Composite video and super video signals can be connected on Input 1 when an optional decoder is installed. • Input 2 has no decoder so composite video and super video signals can not be connected. R5976445 BARCO GALAXY 15042003... - Page 28 TMDS Clock- How to select input slot 1 or 2 ? 1. Key in 1 or 2 on the RCU or on the local keypad. 1. Only available on Input 1 when an optional decoder is installed. R5976445 BARCO GALAXY 15042003...
-
Page 29: Left/Right Phasing Module (Input 3)
1. Connect the stereo emitter signal from the Image Generator to the input (BNC or Mini DIN) of the Left/Right Phasing module. 2. Connect the IR emitters to the output (BNC or Mini DINS) of the Left/Right Phasing module. (image 5-5) Image 5-5 Left/Right phasing module connections 2. A BNC T-splitter is required. R5976445 BARCO GALAXY 15042003... -
Page 30: Communication Connections
For more information about the use of this remote control, consult the user manual R5976251. 5.6.3 Trigger output Purpose This trigger output can deliver a 5 V output voltage to trigger an external device (max. 10 mA). This voltage is available when the projector is on. R5976445 BARCO GALAXY 15042003... -
Page 31: Getting Started
Do not press any longer on the standby key otherwise the projector will restart. MUTE to interrupt the sound reproduction. When running in Stereo Mode use this button to toggle the projector between Mono Mode and Stereo Mode. Digit buttons direct input selection. R5976445 BARCO GALAXY 15042003... -
Page 32: Operating The Projector
The projector mode indication lamp will be green. Press a digit button to select an input source. Lamp Run time indication see chapter 5. Connections, Switching On, page 21 Lamp Light output indication see chapter 5. Connections, Switching On, page 21 R5976445 BARCO GALAXY 15042003... -
Page 33: Switching To Standby
2. Press the cursor key ↑ or ↓ to highlight Service. (menu 6-2) When password protected, your password will be asked. (more explanation about access by password can be found in Chapter ’Start up the Adjustment mode’. 3. Press ENTER to display the Service mode menu. R5976445 BARCO GALAXY 15042003... -
Page 34: Quick Lens Adjustment
Quick Lens Adjustment Quick zoom/focus adjustment 1. Press the Selection key *, Barco key. The zoom/focus menu will be displayed. (image 6-1) 2. Push the cursor key ↑ or ↓ to zoom and ← or → to focus the image. -
Page 35: Quick On Screen Color Change
1. Plug one end of the remote cable in the connector on the bottom of the RCU. 2. Plug the other end in the connector in the front panel of the projector labelled RC. (image 6-3) Image 6-3 Hardwired to remote R5976445 BARCO GALAXY 15042003... -
Page 36: Projector Address
IBM PC (or compatible), Apple MAC, etc. for addresses between 0 and 255. Common Address Every projector has a common address ’0’ or ’1’. The choice between ’0’ and ’1’ can be selected in the Service mode. R5976445 BARCO GALAXY 15042003... -
Page 37: Displaying And Programming Addresses
When the Pause key is pressed, the image projection is stopped, a black screen will be displayed and the projector remains with full power for immediate restart. The display on front of the projector will show a "P". R5976445 BARCO GALAXY 15042003... - Page 38 Select a source number. The Stand-by Key When the Stand-by key is pressed, the image projection is stopped and the projector goes to stand-by. This situation is used when a projection stop is planned for a longer period. R5976445 BARCO GALAXY 15042003...
-
Page 39: Start Up Of The Adjustment Mode
Some items in the Adjustment mode are password protected. While selecting such an item, the projector asks to enter your password (Password protection is only available when the password strap on the controller module is ON, call an authorized service center to change the position of the password strap). R5976445 BARCO GALAXY 15042003... -
Page 40: Menus On Local Lcd Display
The menus will be displayed line by line in the same order as they were displayed on the projection screen. Adjustments can be done while the projector is running without projecting the disturbing menus on the screen. Use the cursor keys to scroll through the menus and press ENTER to activate the displayed menu. R5976445 BARCO GALAXY 15042003... -
Page 41: Random Access Adjustment Mode
8. Random Access Adjustment Mode 8. RANDOM ACCESS ADJUSTMENT MODE Overview • Overview Flow • File Service • Picture Tuning • Geometry • Stereo Options 8.1 Overview Flow Overview Image 8-1 Overview Flow Random Access Adjustment Mode R5976445 BARCO GALAXY 15042003... -
Page 42: File Service
Keep in mind that the Stereo Source answers the Projector’s Stereo Source Specificationssee chapter 4. Stereo Mode, Stereo Source Specifications, page 19. When using a Stereo Source 2 files are already in the list: SGI_108 and SGI_110, other will follow. R5976445 BARCO GALAXY 15042003... -
Page 43: Possible File Manipulations
FILE SERVICE EDIT PICTURE TUNING RENAME GEOMETRY COPY SCENERGIX DELETE OPTIONS STEREO OPTIONS Select with ↑ or ↓ Select with ↑ or ↓ then <ENTER> then <ENTER> <EXIT> to return. <EXIT> to return. Menu 8-3 Menu 8-4 R5976445 BARCO GALAXY 15042003... -
Page 44: Load File
When scrolling through the files, the image will be adapted according to the settings of the selected file ( on line adaptation. The image is not perfect ? If the displayed image is not correct after selecting the best fitting file, go to the Edit menu, select the active file and change the File settings. R5976445 BARCO GALAXY 15042003... -
Page 45: Edit File
How to change a setting with the cursor keys and counting up or down? 1. Push the cursor key ↑ or ↓ to select an item. The color of the selected item will change. 2. Counting up or down by pushing the cursor key ← or →. R5976445 BARCO GALAXY 15042003... -
Page 46: Correct Value
The width of the clamp pulse can be any value between 0 and 255. Change the value by pushing the cursor key ↑ or ↓. 3. The Start Positions have no real meaning for stereo sources 4. When adjusting a Stereo Source these values will be lower compared to Mono Sources. R5976445 BARCO GALAXY 15042003... - Page 47 Synchronous refresh cannot be used. Film mode detection: Detects in the [on] mode if the source is film or video. Use the ENTER key to toggle between [on] or [off] [On] or [Off] R5976445 BARCO GALAXY 15042003...
-
Page 48: Rename
No changes are made. RENAME FILE From file name : Video525.c01 To file name : demo.c10 Select with ← or → Reprogram with ↑ or ↓ or numeric keys <ENTER> to confirm <EXIT> to return. Menu 8-16 R5976445 BARCO GALAXY 15042003... -
Page 49: Copy
1. Push the cursor key ↑ or ↓ to highlight Delete. (menu 8-20) 2. Press ENTER. The delete selection menu will be displayed. (menu 8-21) 3. Push the cursor key ↑ or ↓ to select a file name. R5976445 BARCO GALAXY 15042003... -
Page 50: 10File Options
[automatic] : correct file will be loaded automatically. [manual] : correct file has to be loaded manually. 8.3 Picture Tuning Overview • Start up • Color Temperature • Gamma • Decoding • Dynamic Color Depth • Noise Reduction • Input Balance R5976445 BARCO GALAXY 15042003... -
Page 51: Start Up
2. Push the cursor key ↑ or ↓ to adjust red and push the cursor key ← or → to adjust blue (range 0 to 255) in comparison with the green color. (image 8-3) Note: Even when running in Stereo Mode it is possible to pop up this barscale by pushing the ? key on the RCU or local keypad. R5976445 BARCO GALAXY 15042003... -
Page 52: Gamma
GAMMA DECODING [EBU] DYNAMIC COLOR DEPTH NOISE REDUCTION INPUT BALANCE Select with ↑ or ↓ then <ENTER> <EXIT> to return. Menu 8-30 8.3.5 Dynamic Color Depth Purpose Increases color contrast for all video and data sources. R5976445 BARCO GALAXY 15042003... -
Page 53: Noise Reduction
This procedure is not so easy. Overview • Input Balance for RGB input signals • Input Balance for YUV signals There are 2 different adjustment procedures, one for RGB (included Video and S-Video) and one for YUV input signals. R5976445 BARCO GALAXY 15042003... -
Page 54: Input Balance For Rgb Input Signals
5. Adjust with the cursor keys ↑ or ↓ or ← or → until the red respectively blue noise becomes visible in the white areas and return one step. INPUT BALANCE WHITE BALANCE BLACK BALANCE Select with ↑ or ↓ then <ENTER> <EXIT> to return. Menu 8-35 R5976445 BARCO GALAXY 15042003... -
Page 55: Input Balance For Yuv Signals
Geometry is only available in Mono Mode, when running in Stereo Mode this item will be grayed out in the Random Access menu. For shifting an image in Stereo Modesee chapter 8. Random Access Adjustment Mode, Stereo Timings, page R5976445 BARCO GALAXY 15042003... -
Page 56: Geometry Start Up
Menu 8-39 8.4.3 Shift What can be done ? The image can be shifted in a horizontal or vertical direction. Image 8-4 Shift adjustment Shift to the left Shift to the right Shift upwards Shift downwards R5976445 BARCO GALAXY 15042003... -
Page 57: Size
When adjusting the horizontal size, the left side of the image is fixed and only the right side can be moved to its exact position. Image 8-5 Size adjustment Horizontal size adjustment Vertical size adjustment R5976445 BARCO GALAXY 15042003... -
Page 58: Side Keystone
Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and to hide or black out unwanted information (or noise). A ’0’ on the bar scale indicates no blanking. R5976445 BARCO GALAXY 15042003... -
Page 59: Aspect Ratio
<ENTER> then <ENTER> <EXIT> to return. <EXIT> to return. Menu 8-43 Menu 8-44 8.4.7 Aspect Ratio Purpose To force the projector in a typical aspect ratio. E.g. projecting a 4:3 image in a 16:9 aspect ratio. R5976445 BARCO GALAXY 15042003... -
Page 60: Stereo Options
When does the projector run in Stereo Mode ? • It is possible to program a Turnover frequency for the BARCO Galaxy projector, when a source is detected with a vertical frequency that exceeds this Turnover point the projector will switch from Mono Mode to Stereo Mode. -
Page 61: Turnover Point
<EXIT> to return. Menu 8-48 8.5.4 Stereo Phase What can be done ? With Stereo Phase it is possible to apply an adjustable time delay on the stereo emitter signal. Image 8-8 Stereo Phase Adjustment R5976445 BARCO GALAXY 15042003... -
Page 62: Invert Stereo
With Invert Stereo we can invert the stereo emitter signal (Left eye opens when a right image is supplied to the projector) We advise to set Invert Stereo ON, one frame delay is inherent to DLP technology. Image 8-9 Invert Stereo Adjustment R5976445 BARCO GALAXY 15042003... -
Page 63: Stereo Timings
<EXIT> to return. <EXIT> to return. Menu 8-51 Menu 8-52 8.5.6.2 Horizontal Delay What can be done ? The Stereo image can be shifted in a horizontal direction. R5976445 BARCO GALAXY 15042003... -
Page 64: Vertical Back Porch
VERTICAL BACK PORCH V FREQUENCY OFFSET AUTO V FREQUENCY [ON] V FREQUENCY: 105 Hz Select with ↑ or ↓ then <ENTER> If autofrequency is off, program the frequency with numeric keys <EXIT> to return. Menu 8-54 R5976445 BARCO GALAXY 15042003... -
Page 65: Vertical Frequency Offset
V FREQUENCY: 105 Hz Select with ↑ or ↓ then <ENTER> If autofrequency is off, program the frequency with numeric keys <EXIT> to return. Menu 8-55 8.5.6.5 Auto Vertical Frequency We advise to set Auto Vertical Frequency ON. R5976445 BARCO GALAXY 15042003... - Page 66 V FREQUENCY: 090 Hz Select with ↑ or ↓ then <ENTER> If autofrequency is off, program the frequency with numeric keys <EXIT> to return. Menu 8-58 5. We advise this is done only by experienced users. R5976445 BARCO GALAXY 15042003...
-
Page 67: Installation Mode
______________ LENS 1. DVI OUTPUT [Active Image] QUICK ACCESS KEYS INTERNAL PATTERNS Select with ↑ or ↓ Select with ↑ or ↓ then <ENTER> then <ENTER> <EXIT> to return. <EXIT> to return. Menu 9-3 Menu 9-4 R5976445 BARCO GALAXY 15042003... -
Page 68: 800 Peripheral
When a RCVDS05 is connected to the projector, the type of output module of this RCVDS05 has to be defined in the 800 peripheral menu. • standard output module • 5 cable output module 6. Only available on Input 1 when an optional decoder is installed. R5976445 BARCO GALAXY 15042003... -
Page 69: Defining The Infrared Communication Protocol
Switching from one source to another. To minimize undesired effects when switching from one source to another one can use the Seamless switching mode, beside Seam- less switching there is a choice between several effects which render the transitions more enjoyable. R5976445 BARCO GALAXY 15042003... -
Page 70: No Signal
When an effect is selected within seamless source switching, wait until the effect is terminated before switch- ing to another source (± 2 seconds). 9.5 No Signal Overview • Changing the Background Color • Changing the Shutdown Setting • Changing the Shutdown Time R5976445 BARCO GALAXY 15042003... -
Page 71: Changing The Background Color
Select with ↑ or ↓ then <ENTER> then <ENTER> <EXIT> to return. <EXIT> to return. Menu 9-13 Menu 9-14 9.5.3 Changing the Shutdown Time Range The shutdown time can be set between 5 min. and 60 min. R5976445 BARCO GALAXY 15042003... -
Page 72: Convergence
Menu 9-18 9.7 Configuration What can be done? The way of physical installation of the projector can be defined to the projector. The following installation configurations are possible: • front/table • front/ceiling • rear/table • rear/table R5976445 BARCO GALAXY 15042003... -
Page 73: Lens Adjustment
SOURCE SWITCHING OPTIONS NO SIGNAL CONVERGENCE CONFIGURATION LENS QUICK ACCESS KEYS INTERNAL PATTERNS Select with ↑ or ↓ Select with ↑ or ↓ then <ENTER> then <ENTER> <EXIT> to return. <EXIT> to return. Menu 9-20 Menu 9-21 R5976445 BARCO GALAXY 15042003... - Page 74 ZOOM/FOCUS Use the same SHIFT zoom and focus OPTIONS of the lens for all files? [No] Select with ↑ or ↓ then <ENTER> <ENTER> to toggle <EXIT> to return. <EXIT> to return. Menu 9-24 Menu 9-25 R5976445 BARCO GALAXY 15042003...
-
Page 75: Quick Access Keys
MENU POSITION [Default] NO SIGNAL CONVERGENCE CONFIGURATION LENS QUICK ACCESS KEYS INTERNAL PATTERNS Select with ↑ or ↓ Select with ↑ or ↓ then <ENTER> then <ENTER> <EXIT> to return. <EXIT> to return. Menu 9-28 Menu 9-29 R5976445 BARCO GALAXY 15042003... -
Page 76: 2Menu Position
CONFIGURATION PURITY LENS PAGE CHAR QUICK ACCESS KEYS ALPHA_NUMERIC CHARS INTERNAL PATTERNS Select with ↑ or ↓ Select with ↑ or ↓ then <ENTER> then <ENTER> <EXIT> to return. <EXIT> to return. Menu 9-32 Menu 9-33 R5976445 BARCO GALAXY 15042003... -
Page 77: Service Mode
All other password protected items are now available if you stay in the adjustment mode. 10.3 Identification What can be seen on the identification screen? The identification screen shows the general information of the projector. R5976445 BARCO GALAXY 15042003... -
Page 78: Password
This item is password protected when the password strap is installed. The password function is enabled when the password strap, second switch of S2 on the controller module is installed. Consult an authorized Barco service technician to change the strap position. About password types. -
Page 79: 2Access Control List
<EXIT> to return. <EXIT> to return. Menu 10-6 Menu 10-7 10.4.2 Access Control List What is possible? In the access control list the owner can set up the access possibilities for the user and the guest. R5976445 BARCO GALAXY 15042003... -
Page 80: Access Levels
An access level can be added to the following items: • Adjustment mode • Barco logo • Change projector address • File delete • File delete all • Input balance • Installation • Random access • Serial communication • Service R5976445 BARCO GALAXY 15042003... -
Page 81: Changing Language
<ENTER> to confirm <EXIT> to return. <EXIT> to return. Menu 10-13 Menu 10-14 10.7 Serial Communication Overview • Start Up of the Serial Communication • Baud rate Setting • Setting up the Interface Standard • RS422 Termination R5976445 BARCO GALAXY 15042003... -
Page 82: 1Start Up Of The Serial Communication
2. Press ENTER to toggle between the available baudrates. Default : 9600 SERIAL COMMUNICATION PROJECTOR ADDRESS 001 BAUDRATE [115200] INTERFACE STANDARD [RS232] RS422 TERMINATION [ON] Select with ↑ or ↓ then <ENTER> <EXIT> to return. Menu 10-17 Available baud rates. 115200/57600/38400/19200/9600/4800/1200 R5976445 BARCO GALAXY 15042003... -
Page 83: 3Setting Up The Interface Standard
To the RS232in of the first projector, a terminator must be connected (Z3498823). The out of the first must be connected to the in of the next projector, etc. All projectors must have a different projector address between 1 and 12. All must have the same baud rate and RS mode. R5976445 BARCO GALAXY 15042003... - Page 84 CLO in a chain of projectors. TER] Mode switching 1. Push the cursor key ↑ or ↓ to highlight Mode.menu 10-21 2. Press ENTER to toggle between [NORMAL] and [ECONOMIC]. normal normal light output eco- reduced light output nomic R5976445 BARCO GALAXY 15042003...
-
Page 85: Barco Logo
OFF: no key on the RCU is used to display the BARCO logo. TEXT: the TEXT key on the RCU is used to display or to remove the BARCO logo with one single push on this key (only in operational mode). -
Page 86: Preset Input Balance
10.12Diagnosis 10.12.1How to start up the Diagnosis? What can be seen? The diagnosis menu gives the possibility to select an overview of the I C controlled IC’s and an overview of the working of the formatter. R5976445 BARCO GALAXY 15042003... -
Page 87: C Diagnoses
1. Push the cursor key ↑ or ↓ to highlight Formatter. (menu 10-33) 2. Press ENTER to select. An overview of the working of the formatter will be displayed. DIAGNOSIS FORMATTER SMPS Select with ↑ or ↓ then <ENTER> <EXIT> to return. Menu 10-33 R5976445 BARCO GALAXY 15042003... -
Page 88: 4Smps
The SMPS overview menu will be displayed. (menu 10-35) DIAGNOSIS SMPS I2C (30H) FORMATTER AMBIENT SMPS TILT SWITCH MICRO SWITCH LAMP TEMP LPS MAINS POWER Select with ↑ or ↓ then <ENTER> <EXIT> to return. <EXIT> to return. Menu 10-34 Menu 10-35 R5976445 BARCO GALAXY 15042003... -
Page 89: Programmable Function Keys
A confirmation menu will be displayed : " <F1> will be used to quickly access this menu". (menu 11-1) CONFIRM QUICK ACCESS <F1> will be used to quickly access this menu. <ENTER> to confirm <EXIT> to cancel Menu 11-1 R5976445 BARCO GALAXY 15042003... - Page 90 11. Programmable Function Keys R5976445 BARCO GALAXY 15042003...
-
Page 91: Standard Source Set Up Files
11. Fpix MHz: pixel frequency 12. Ftot : total pixels on one horizontal line. 13. Pact: active pixels on one horizontal line. 14. Ltot: total lines in one field 15. Lact: active lines in one field. R5976445 BARCO GALAXY 15042003... - Page 92 64,125 1328 1024 SUNXGA70 1024x768 70,041 56,596 74,250 1312 1024 SUNXGA77 1024x768 77,069 62,040 84,375 1360 1024 SUP_MAC 1024x768 60,000 48,780 63,999 1312 1024 SVGA_56V 800x600 56,250 35,156 36,000 1024 SVGA_60V 800x600 60,317 37,879 40,000 1056 R5976445 BARCO GALAXY 15042003...
- Page 93 1328 1024 SGI_108V 1280x1024 112,676 164.145 1460 1280 1041 1024 SGI_110V 1280x1024 114,286 167.160 1464 1280 1038 1024 SGI_96V 1280x1024 102,564 163.277 1600 1280 1063 1024 HP_100V 1280x1024 108,108 187.488 1728 1280 1085 1024 Table A-1 R5976445 BARCO GALAXY 15042003...
- Page 94 A. Standard Source set up Files R5976445 BARCO GALAXY 15042003...
-
Page 95: Index
Input Balance 49–51 Lamp 50–51 Run time Load Left/Right Phasing module (Input 3) Manipulations Lens 15–16, 69 Noise Reduction Adjustment Rename Cleaning start up Selection Function Keys Lenses 14–15 programming Available lenses Fuses Formulas installation Geometry 51–55 R5976445 BARCO GALAXY 15042003... - Page 96 Picture Tuning Turnover Point Start up Stereo Source Specifications Stereo Options Switching off 22, 29 Switching On 21, 28 Terminology Switching to standby 22, 29 Overview RS232 RS422 Running in Stereo Mode Temperature Ambient Safety Instructions R5976445 BARCO GALAXY 15042003...
- Page 97 Revision Sheet Barco nv Simulation Products Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.82.11, Fax: +32 56.36.84.86 E-mail: info@barco.com, Web: www.barco.com From: Date: Please correct the following points in this documentationPlease correct the following points in this documentation (R5976445/02): page wrong...