5.5.7.3.7 Center selection
What can be done ?
With the Coarse Center selection it is possible to perform a coarse bow correction on the projected image.
How to select the Center ?
1. Push the cursor key ↑ or ↓ to to highlight the Coarse selection.
2. Press ENTER until center is displayed. (menu 5-66)
GEOMETRY DISTORTION
center
col = 4
row = 4
pixels x = 0
y = 0
subpixels x = 0
y = 0
Menu 5-66
Image 5-24
Coarse Center selection
5.5.7.3.8 Center adjustment
How to adjust the Center ?
1. Push the cursor key ↑ or ↓ to select pixel x = 0 in the Geometry Distortion menu. (menu 5-67)
2. Push the cursor key ← or → to coarse shift the Center in a horizontal way. (image 5-25)
3. Push the cursor key ↑ or ↓ to select pixel y = 0 in the Geometry Distortion menu. (menu 5-68)
4. Push the cursor key ← or → to coarse shift the Center in a vertical way. (image 5-26)
R5976420 BARCOREALITY SIM 6 ULTRA 14052003
5. Random Access
69