Start Up; Horizontal Or Vertical Linearity Selection - Barco BARCOREALITY SIM 6 ULTRA R9040150 Owner's Manual

5.5.7.5.1 Start up

How to Start up the Fine adjustment ?
1. Push the cursor key ↑ or ↓ to highlight Fine in the Edit menu. (menu 5-77)
2. Press ENTER to select.
The Geometry Distortion menu will be displayed. (menu 5-78)
GUIDED GEOMETRY MAP
COARSE
LINEARITY
FINE
SHIFT
TRANSPORT DELAY
BLANKING/SOFT EDGE
RESET
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-77

5.5.7.5.2 Horizontal or Vertical Linearity selection

What can be done ?
Within this menu it is possible to fine tune the linearity of the projected image.
The Linearity adjustment is best done when a hatch pattern is projected on the screen.
By pressing the * key on the RCU an internal hatch pattern is projected instead of the image data.
How to select the Horizontal or Vertical Linearity ?
1. Push the cursor key ↑ or ↓ to highlight the Fine selection. (menu 5-79)
2. By default hor lin is already selected, if not, press ENTER to scroll through the available Fine selections until hor lin or ver lin is
displayed.
3. Push the cursor key ← or → to select the desired horizontal or vertical linearity point.
The COL & ROW indicator will show the corresponding position of the selected grid point and an indication box will show the
selected grid point on the screen. (image 5-33)
GEOMETRY DISTORTION
hor lin left top
col = 2
row = 0
pixels x = 0
y = 0
subpixels x = 0
y = 0
Menu 5-79
R5976420 BARCOREALITY SIM 6 ULTRA 14052003
GEOMETRY DISTORTION
hor lin left top
col = 2
row = 0
pixels x = 0
y = 0
subpixels x = 0
y = 0
Menu 5-78
5. Random Access
75